Alloy wheel lathes have high reliability, fewer failures, strong adaptability to the environment, regardless of whether it is temperature or moderate strength, they have a certain degree of adaptability, the internal circuit is relatively complex, and it requires a close-fitting CNC lathe control system Connection and operation. Before lathe processing, input the information of the processed part and the required program to the control end, and the numerical control device will analyze and process the received information, and according to the processing result, it will be distributed to each device for completion. Process, and complete the processing tasks of the parts according to the required shape and size.
Analysis of several abnormal phenomena of alloy wheel lathe:
Numerical control systems are relatively diverse, with various types and styles, but they are all derived from the initial requirements and needs of the system. Numerical control systems are generally divided into control systems, servo systems, and position measurement systems. These three parts are effectively combined to complete A complete CNC system. Before powering on, you can perform some simple inspections, for example, open the electric control box of the lathe, check whether the relays, contactors, etc. are loose or not.
Then check the electric box door and check the sockets of various interfaces. If there are losses the situation must be reinserted tightly to ensure good contact and stable operation. Inspect each circuit board according to the instructions of the lathe, correct the wrong place, check the next step if there is no error. Check the wiring in the relevant wiring place, whether there is bare copper wire in the wiring, and each terminal must be screwed Tighten it once, and the sockets of each motor must be tightened to ensure that there is no looseness; to check the solenoid valve, you need to push it many times to ensure that it will not run poorly due to a long time without power. If you find a problem, you need to sort it out in time and make a record.